Atheros Powerline Toolkit
This document is the manual for the Qualcomm Atheros Open Powerline Toolkit. New users should read the first chapter before starting using the toolkit because it will answer many questions about toolkit installation, structure, content and application. QCA Production Powerline Toolkit by Qualcomm Atheros. Versions: 2.1.
Any ideas what this can be? Thanks in advance. Hi Zibri, (update, thaught i'd share the information) It looks like the problem is solved. I saved the prescale values to a file and then examined the contents. What i noticed was that the corresponding amplitude values to the tones were somewhat low. (most of them were below 0dB) This indicated a weak signal.
# ===================================================================== # # NOTICE OF LICENSE CHANGE # # As of 15-Oct-2013, Qualcomm Atheros, Inc. Decided to migrate the # license of this Powerline Toolkit to more clearly communicate our # expectations regarding the licensing and usage of the Powerline # Toolkit. We do not expect this will have a practical impact on any # current or future users of the Powerline Toolkit. Older versions # of the Powerline Toolkit continue to be available under the # previous license. # # The new license, known as the Clear BSD License, appears below. # # --------------------------------------------------------------------- /*====================================================================* * * Copyright (c) 2013 Qualcomm Atheros, Inc. Driver megapixel 10x digital zoom f 3.85 mm software.
THIS SOFTWARE IS PROVIDED BY THE * COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * *--------------------------------------------------------------------*/ This package is an open version of the Qualcomm Atheros Powerline Toolkit. It may be distributed as a zip, gzip or bzip2 tarball that contains source code and build scripts for Linux, OpenBSD, MAC OSX and Microsoft Windows. It also contains documentation in docbook XML, HTML and plain text format. We recommend that you open file docbook/index.html with a web browser the read Chapter 1 before attempting to install or use the toolkit but the impatient may do the following and survive. TO INSTALL ---------- 1.
Atheros Powerline Toolkit
# # The new license, known as the Clear BSD License, appears below. God of war chains of olympus iso 500mb download. # # --------------------------------------------------------------------- /*====================================================================* * * Copyright (c) 2013 Qualcomm Atheros, Inc. * * All rights reserved.
Hi Zibri, Seems that the link for firmware 3.3.4.8 has vanished now. Any chance of a reupload? I've got two generic ones with the 6300 chipset in coming next week. One of the advantages of moving house I guess - you get to get new toys!:P Cheers!
Here is a list of different Windows versions of the PowerPlug Utility for Adapters. These typically work for Atheros-based PowerPlugs from any brand. • • Latest Version(s) [ ] • custom build v2.2.2758.8 dated July 21, 2017 Shows link rates between all adapters Screenshot here: • custom build v7.0.4.15.0921 dated September 21, 2015 • custom build v4.3.3 dated May 30, 2017 for Windows/Linux/Mac • provides the most recently released Qualcomm version v7.2 Build 0004 dated May 07, 2014 Devolo [ ] devolo Cockpit Version 4.3.3 Custom build by devolo for their powerline adapters.
One pair's firmware is INT6300-MAC-3-0-3052-116-FINAL-B the other firmware is INT6400-MAC-4-0-40-20090501-FINAL-C I also get an error like 'Device manager version does not match the target, limited options apply, considering upgrading. When trying to use the NP201AV Powerline Utility software. @Brett, @anyone, Any news if INT6400's can have their firmware changed?
Hello again, As said in my previous message, my Devolo AVPlus 200 stopped working after upgrading the firmware to version 4.1. Devolo's own driver update program wouldn't let me reinstall the firmware or install an older firmware, saying that I already had the most recent version. Having contacted Devolo's technical support and not getting any real help from them, I decided to try the Device Manager on my AVPlus 200.
* * All rights reserved. * * Redistribution and use in source and binary forms, with or * without modification, are permitted (subject to the limitations * in the disclaimer below) provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * * Redistributions in binary form must reproduce the above * copyright notice, this list of conditions and the following * disclaimer in the documentation and/or other materials * provided with the distribution. * * * Neither the name of Qualcomm Atheros nor the names of * its contributors may be used to endorse or promote products * derived from this software without specific prior written * permission. * * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE * GRANTED BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE * COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Many 200 Mb/s powerline adapters nowadays are based on the INTELLON 6300 chipset. Despite what can be thought looking at them, they are all using the same hardware and firmwares. I heard many people with Netgear XAV101 or Linksys PLK 200 or PLE 200 having problems after firmware updates and many other people with other brands having much more problems because of lack of support or configuration/upgrade utilities.
Contains OEM Preference Editor 7-2-4 Works with TRENDnet HomePlug AV and HomePlug AV2 series. Download link: Version: 7.2, Build 0004 Dated: May 07, 2014 Operating system compatibility: For Windows 8 Windows 7 Windows Vista Windows XP TRENDnet Powerline Utility Version v7.1 Build 0101 Released by TRENDnet for all of their Atheros-based powerline adapters. Model: TPL-303E/304E/305E/306E/307E/308E/310AP/401E/402E/405E/4052E/406E/407E/408E. Hardware Version: v1 Released: 12/2013. Contains OEM Preference Editor 7-1-101 Download link: Version: 7.1, Build 0101 Dated: September 05, 2013 Operating system compatibility: Windows 8 TRENDnet Powerline Utility Version 7.1.15 Works with TRENDnet HomePlugAV series.
Plcboot only performs a one-time boot when given the options above. To make the firmware permanent again, the flash needs to be rewritten. (Allegedly, plcboot can do that too, but it needs a “softloader” file, which I couldn’t be bothered to extract from the TP-Link software.) Hints and issues • The plcboot and plctool utility may need root permissions, since they try to write raw packets to the ethernet interface.
It may be distributed as a zip, gzip or bzip2 tarball that contains source code and build scripts for Linux, OpenBSD, MAC OSX and Microsoft Windows. It also contains documentation in docbook XML, HTML and plain text format. We recommend that you open file docbook/index.html with a web browser the read Chapter 1 before attempting to install or use the toolkit but the impatient may do the following and survive. TO INSTALL ---------- 1.
• Compile and install all tools in /usr/local/bin using 'sudo make install'. • Compile and install man pages in /usr/share/man/man1 using 'sudo make manuals'.
3) Have downloaded three of the links – ClassB-Solwise-PIB-FW.zip (and unzipped it), 3052.rar, and DM.rar. Do I need the big setup and upgrade utility file? 4) What should I do next? Considering that this is supposed to be sooooo easy, I am confused and frustrated. Sorry to be so dense, but don’t want to mess this up. Thanks Steve said.
Can someone post the firmware with boosted prescale? As Eddie has written before, I would also really like to know how to flash the latest Devolo firmware on other INT6000-based devices. I've already extracted the firmware and dozens of PIB files but I'm quite unsure how to proceed. I've managed the cross-update using the int6k.exe tool bundled with LeaCom's Softplug app:-) said. Is there a device manager that works on Win 7? The one to modify PIBs?
Both operators will deploy Atheros’ EoC technology as they strengthen their infrastructure to support next-generation broadband and digital TV services. Facts/Highlights: • The AR7400 is a fourth-generation HomePlug chipset that delivers carrier-grade broadband communications over both power lines and coax. This gives broadband providers a flexible platform to support a variety of next-generation services without overhauling or retrofitting their existing infrastructure.
Here is a list of different Windows versions of the PowerPlug Utility for Adapters. These typically work for Atheros-based PowerPlugs from any brand. • • Latest Version(s) [ ] • custom build v2.2.2758.8 dated July 21, 2017 Shows link rates between all adapters Screenshot here: • custom build v7.0.4.15.0921 dated September 21, 2015 • custom build v4.3.3 dated May 30, 2017 for Windows/Linux/Mac • provides the most recently released Qualcomm version v7.2 Build 0004 dated May 07, 2014 Devolo [ ] devolo Cockpit Version 4.3.3 Custom build by devolo for their powerline adapters. Download link: (EN) (DE) Version: 4.3.3 Dated: May 30, 2017 Operating system compatibility: Windows Ubuntu Linux Mac OS X devolo Cockpit Version 4.3.2 Custom build by devolo for their powerline adapters. Ubuntu only at this time. Download link: Version: 4.3.2 Dated: January 31, 2017 Operating system compatibility: Ubuntu Linux devolo Cockpit Version 4.3.1 Custom build by devolo for their powerline adapters. Download link: Version: 4.3.1 Dated: July 03, 2015 Operating system compatibility: Windows Ubuntu Linux Mac OS X [ ] TRENDnet Powerline Utility Version v7.2 Build 0004 Latest version Released by TRENDnet for their QCA7500 powerline adapters.
Atheros Powerline Toolkit Download
* * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE * GRANTED BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE * COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
That piece of software only tells me that it can’t find the local device. A quick web search (“TP-Link PowerLine failed firmware fix” and similar) didn’t come up with anything good right away. Well then, I thought, let’s see if it gives off any signs of life. I directly connected the PLC to my trusty MacBook and fired up WireShark. When the first packets started appearing I breathed a sigh of relief. The PLC still manages to get an ethernet link up. Amidst the stuff the Mac fires off when detecting a link (DHCP, MDNS, etc.) I finally found what I was looking for: Broadcast packets, “HomePlug AV” protocol, “Atheros_something” MAC, “Action Required Notification (Bootloader)”.